Spindle 5/8" Arbor Hole Shaft for Motor - Grinder - 1/2" Shaft Left Hand Thread

Description

5/8" L ARBOR HOLE SPINDLE 1/2" STRAIGHT SHAFT
5/8" ARBOR HOLE
-
SHAFT SIZE 1/2"
3-7/16" LONG
-
LEFT
HAND THREAD
Arbor - Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.
This Arbor - Spindle is used to hold Wheels with 1/2" arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more.
Arbor hole on this Spindle is a 5/8" to work on 5/8" diameter shaft Grinders, Motors or Polishers.
The arbor is made with threading to be used on the LEFT Side of the motor, fastened and held on the motor shaft with 2 Allen Head Set Screws.
Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.
FEATURES:
·
Precision Quality
·
Machining is done by CNC Equipment
·
Made of Steel and Anodized Black Finish
·
Set of Allen Screw do not protrude above the main shaft of the spindle.
·
Spindle comes with 2 Steel Machined Washers
·
Left Hand 1/2" x 20 Nut
·
Quality Hardware (Washers and Screws)
.
Specifications:
JETS Product # 1603-853475
-
Material:
Cold Rolled Steel
-
Overall Length:
3-7/16" - 87.3mm
-
Arbor Body Diameter:
1" - 25.3mm
-
Spindle Body Length:
1-9/16" - 39.7mm
-
Spindle Shaft Length:
1-7/8" - 47.65mm
-
Arbor Hole
:
5/8" - 15.87mm  for Shaft Connection
-
Spindle Shaft Diameter:
1/2" - 12.7mm
-
Weight:
7.3oz. - 207gr
>>>
Spindle is made to be
used on a
5/8" shaft
diameter and on the
LEFT Hand Side of Motor
with
forward direction
.
SHIPPING:  Via USPS FIRST CLASS MAIL
NOTE: Visit
JETSTOOLS
our ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more
J
ewelers
E
quipment
T
ools and
S
upplies
.
JETS Inc.
B9  2X-1.3LZ  5X-FRE 2.3
LZ
412 CKSP  Z M